Pressure regulator for CO2 suitable for sparkling water dispensers, equipped with double pressure gauge, refillable cylinders.

The pressure regulator with double pressure gauge is used to verify the carbonation level (the low pressure gauge) and to check the filling level of the tank.
The pressure regulator is supplied fully assembled with adaptor for refillable cylinders with 28x1/4" coupling, which is the standard size for all foodgrade cylinders.

To connect the pressure regulator to the cylinder you should tighten the nut on the leaflet valve of the cylinder, it is important not to damage the OR seal.
We recommend you to hand tighten the nut and then to tighten it carefully with a wrench.

The pressure regulator is intended only for home use.

General Information   Application Home Water Dispensers Incoming pressure 10-160 bar Regulation 0-6 bar Cylinder coupling 28x 1/4" Output C02 1/8 " Material HR anodized aluminum

Size   Lenght x Hight 13 cm x 10,8 cm Diameter 4 cm Weight 0.4 Kg

Working Conditions   Min-max Temperature 4-38 °C Max Pressire 12 Bar

Manufacturer    Dream design Manufacturer Code   Saferty Overpressure (pop-off) Legislation PED     Certification     TUV     Disposal     Special Waste