Three way brass mixer for treated drinking water

• Third separated way  
• Hot and cold water connections with standard hoses
• Treated water connector 8 mm (on request we also supply with 6 mm connector pipe - please specify it in the order notes -)  
• Size: height 22 cm, 22 cm protrusion, standard hole  
• Galvanic coloring Copper - Bronze

Approved according DM 174 2004.

The third way is separated: this is an important feature, because it ensures that the water intended for human consumption does not come in contact with the not- treated water, such as hot water.

Suitable for microfiltration and reverse osmosis.

The installation of a three-way mixer is generally simple, since removing the old mixer, there are already both hole and connections for the water ways, to which you just have to add a third pipe for the filtered water.

The mixer is fasten by a bezel that flows out of a threaded bar.
It is advisable to use a 13 socket wrench to remove the old faucet/mixer and to screw the new one. The bezel has to lie on the sink bottom horizontally.

The three way mixer is provided with three hoses with female 3/8" connection and respective seals. We suggest you to use always the new seals, since the old ones can leak.

Maintenance is easy and essential. It is recommended to clean the aerator every 6 months, soaking it in water with Amuchina for few minutes.